PELICAN-519
Pelican-519 is a compact, high-performance condition monitoring and analysis system. Pelican-519 is designed to perform protection and safety along with on-line continuous monitoring of critical rotating machinery in a wide range of applications. This module is designed to perform the absolute bearing and relative shaft vibration monitoring.
Pelican 519 accepts all contact or non-contact type sensor for vibration measurements (factory setting). Pelican 519 has three channels, one channel for phase reference is available for harmonic extraction and rotation speed calculation and rest two channels can be used for vibration measurement of one bearing ( X & Y). We can add upto 12 Pelican 519 module for vibration measurement of upto 24 channels.
The module can be easily interfaced to the plant automation system using digital outputs. Additionally, the system is providing measured values and status over serial interface Modbus RTU and Ethernet TCP/IP.
Key Features of Pelican 519
- Data Acquisition and Monitoring Capabilities
- 2 dynamic channels and 1 phase reference
- Software configurable
- +24 Vdc Power Operated
- Individual Channel Status LED
- Raw buffered outputs on BNC for each Channel
- Built-in digital output interfaces
- USB Communication
- TCP/IP Communication
- Modbus RTU Communication
2 and 3 Wire Transmitters
TR series vibration transmitter uses advanced LSI technology that integrate the signal conditioning, processing and outputting circuitry into one integral unit. It can directly replace the probe driver and connect to the proximity probe and extension cable, converting the signal to a 4-20 mA output. Buffered dynamic output is available for additional analysis.
- TR Series Transmitter is used to monitor:
- Radial Shaft Vibration
- Axial Thrust Position
- Rotation Speed
- Phase Reference
The TR is available as a two wire or three-wire transmitter configuration and certified for use in hazardous areas. The TR series also has an option available to interface with existing proximity probe drivers. This option is typically used when it is desirable to drive the dynamic signal and the 420mA output up to 300 meters or for some hazardous area applications.
DTM Distributed Transmitter Monitors
DTM Series digital transmitter-monitor are ProvibTech's newly released transmitter-monitor series.
They are based on the popular TM Series transmitter-monitor. DTM modules are highly reliable, fully
programmable, and easily configurable.
Each DTM module is a single-channel or dual-channel monitor. Each DTM module can be used independently
for machine protection.
It has all the function and IO port of a multi-channel monitor, such as:
- PT2060 Features include:
- field configuration
- buffered output
- dual 4-20mA output
- dual alarms
- on-site reset
- remote reset / alarm inhibit
- alarm multiply
- dual power input
- and more.
DTM series also have their own unique features. Some DTM integrate driver and monitor into one unit.
All the DTM modules have digital internal bus and external Modbus.
Modular is the nature of DTM Series transmitter-monitor. Customers can pick up appropriate modules
to set up a system. With various DTM modules, customer can realize various functions in the system.
For plant expansion, customer only need a little modification, add some new modules, and the system
will be ready for the new machines.With the advanced digital technology, DTM can be field configured to different functional module. With less spares, customer will save cost.
Seismic (Machine Case Mount) Vibration Transmitter
Velocity is the preferred measurement for most rotating machines with rolling element bearings and the TM016 is a precision solid state loop powered sensor that measures velocity vibration levels and provides a 4-20mA output proportional to the overall vibration level. The 4-20mA velocity output is interfaced into a PLC, DCS or other 4-20mA input devices.
The TM016 is easy to install. Drill and tap a hole on or near the bearing housing and connect the two wire output to monitor, record vibration levels and alarm or shutdown on excess vibration levels. The velocity output is available in peak or RMS.
TM018 Seismic Velocity, Vibration Transmitter
- Low cost online means of monitoring with the capability of interfacing direct into PLC, BMS or any 4-20mA input module. Proven use in vibration monitoring for offline applications using commercially available data collectors.
- Protecting…
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.